Availability: | |
---|---|
Quantity: | |
Beyond
Product Description
UHMWPE(PE1000) is an extremely tough plastic with high wear resistance. It is the strongest and toughest fender of all polyethylene grades used in marine applications. Even as a finishing material, it is lighter and more durable than steel. Polyethylene’s versatility has made it a common material for endless industrial applications that require toughness, low friction and resistance to chemicals.
UHMW-PE marine fender pad will not rot, nor will it be affected by marine borers. It does not contain particles, so it will not chip or crush, and can be easily cut, drilled and processed. The thickness of our UHMW-PE sliding fenders is usually 10mm to 300 mm, and the size ranges from 1,000 x 1,000 mm to 2000 mm x 6000 mm. It can also be customized according to your requirements.
Regular Sizes
2030*3030*(10-260)mm
1240*4040*(10-260)mm
1250*3080*(10-260)mm
1570*6150*(10-260)mm
1240*3720*(10-260)mm
1260*4920*(10-260)mm
1020*4080*(10-260)mm
1500*6200*(10-260)mm
According to customer requirements to cutting
Colors
White, Black, Blue, Green, Yellow and Others.
Parameters
Physical Properties | Test Method | Unit | Value |
Density | ASTM D792 | g/cm3 | 0.93-0.97 |
Water Absorption | ASTM D570 | ℃ | <0.01 |
Mechanical Properties | Test Method | Unit | Value |
Tensile Strength | ASTM D638 | MPa | 40 |
Elongation, at break | ASTM D638 | % | 300 |
Flexural Strength | ASTM D790 | MPa | 24 |
Compression Strength, 10% Deformation | ASTM D695 | MPa | 21 |
Hardness, Shore D | ASTM D2240 | – | D65 |
Coefficient of Friction | – | – | 0.12 |
Thermal Properties | Test Method | Unit | Value |
Heat Deflection Temperature | ASTM D648 | ℃ | 47 |
Melting Point | ASTM D3412 | ℃ | 135 |
Continuous Service Temperature | – | ℃ | 82 |
Electrical Properties | Test Method | Unit | Value |
Surface Resistivity | ASTM D257 | Ω-M | >10 15 |
Dielectric Constant 106Hz | ASTM D150 | 2.3 | |
Volume resistively | ASTM D257 | Ω*cm | >10 15 |
Dielectric strength | ASTM D604 | kV/mm | 45 |
Features
very tough and durable
abrasion and impact resistant
chemical and corrosion resistant
low friction
easy to machine
lightweight
low moisture absorption
Applications
Fender panel facing pads
Fender pile rubbing strips
UE-V fender shields
Facing strips for jetties and wharves
Lock entrance and lock wall protection
Mitres on lock gates
Bridge buttress protection
Pontoon pile guide bearings
Fast-launch lifeboat slipways
Beltings for smaller workboats